Cap fasteners are a recommended best practice installation by housewrap and roofing underlayment manufacturers like GAF, DuPont, Tyvek, Grace and Titanium. Why? Because caps help seal out moisture that can penetrate sidewall and roofing fabrics. Caps provide better holding power than a nail or staple alone, and that means reduced blow-offs and lateral slippage! It also means fewer fasteners are needed to get the job done.  The 1-1/2" 18ga StaplePac for use with STINGER CS150B and CS150 Cap Staplers only

2000ct - 10 rolls of 200 1” collated plastic caps & 20 strips of 1-1/2"staples (100 staples each strip)

The CH38 is the economical, non-pneumatic alternative to stapling. The CH38 is an award-winning champion* for installing housewrap, underlayment, and rolled insulation.

Cap fasteners are a recommended best practice installation by housewrap and roofing underlayment manufacturers like GAF, DuPont, Tyvek, Grace and Titanium. Why? Because caps help seal out moisture that can penetrate sidewall and roofing fabrics. Caps provide better holding power than a nail or staple alone, and that means reduced blow-offs and lateral slippage! It also means fewer fasteners are needed to get the job done.  

2016ct - 12 rolls of 168 collated plastic caps & 24 strips of A-11 3/8" (84 staples per strip)

The CH38A delivers the holding power of a cap with the speed and ease of a hammertacker. With every swing, this airless cap system automatically advances the cap and positions it for the staple.

Durable line reel with rewind hand crank, florescent orange making it easy to see.

Durable line reel with rewind hand crank, florescent orange making it easy to see.

EXTRA HEAVY–DUTY INDUSTRIAL | CSA GRADE 1 | TYPE 1A | 300 LBS. RATED

• Non–conductive fiberglass rails
• Double riveting on each step
• Heavy–duty molded plastic top
• Back–up plates reinforce all top connections
• Extra heavy–duty inside spreader bars
• Extra heavy–duty full 3" serrated aluminum steps
• Extra heavy–duty slip resistant feet
• Rails: 1–1/4" x 3–1/16"
• Legs: 1–1/4" x 1–5/16"
• Available in 3ft, 4ft, 5ft, 6ft, 8ft, 10ft and 12ft

• 300 LBS. Rated
• 30" Width Top
• Heavy-duty aluminum extrusion
• Double solid rivet construction
• Non–slip feet
• Heavy–duty spreaders for long, trouble-free use
• Folding compact design for easy transportation
• Packed on skids for easy warehouse handling
• Available in 2ft, 2-1/2ft, 3ft, 4ft, 5ft, 6ft, and 8ft.

• 300 LBS. Rated
• 10" wide top step
• Heavy-duty aluminum extrusion
• Double solid rivet construction
• Non-slip feet
• Heavy-duty spreaders for long, trouble-free use
• Folding compact design for easy transportation
• Available in 2ft, 2-1/2ft, 3ft and 4ft

• CSA Grade 1
• 300 LBS. Rated
• Extra large D–rung
• Width 17–1/2"
• Protective end caps
• Spring loaded die–cast zinc locks
• Rugged extruded safety shoes with ice pick feet
• CSA Certified
• Available in 16ft, 20ft, 24ft, 28ft, 32ft, 36ft and 40ft

• Extra Heavy-Duty Industrial
• CSA Grade 1
• Type 1A
• 300 LBS. Rated
• Non–conductive fiberglass rails
• Heavy–duty self–aligning safety feet with ice pick plate
• 1–5/8" safety serrated D–rung
• Polyethylene rung sleeve to reduce wear and extend life
• Extra heavy–duty spring assisted gravity locks
• Available in 16ft, 20ft, 24ft, 28ft,32ft, 36ft and 40ft

Super-Dry designed this portable and lightweight air dryer to remove moisture from compressed air.  Dry compressed air will extend the life of your air tools and prevent your nail guns from freezing when working in a cold environment.  Dryer comes with a pre-filled desiccant cartridge and drain valve.

• INLET / OUTLET: 1/2" NPT
• AIRFLOW: 44 CFM
• MAX PRESSURE: 150 PSI
• WEIGHT: 2.5 LBS