The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. Improved performance with massive drilling capacities with up to 152mm hole saw capacity and 50mm auger bit capacity. Equipped with Active Feedback Sensors the tool will automatically shutdown in the event of a kickback. With drilling speeds up to 35% faster then the equivalent 18V model. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
The protective cover can be adjusted quickly, easily and without tools. Safety has also been considered, both grinders are equipped with Active Feedback sensing Technology (AFT). AFT is activated in case of a sudden reduction in speed or when the grinding wheel is clamped in the material and switches the machine off automatically preventing user injuries. These are extra safe machines, equipped with an electric brake which will stock the disc in an instant.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless 125mm (5”) Slide Switch Angle Grinder delivers cutting speeds up to 40% faster then the 18V
equivalent. Re-designed to withstand harsh conditions the GA005G is highly durable with advanced protection against heat and
dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart
and an electric brake that will rapidly stop the wheel rotation for safe user operation.
The 40V Max. Brushless 125mm (5”) Slide Switch Angle Grinder delivers cutting speeds up to 40% faster then the 18V
equivalent. Re-designed to withstand harsh conditions the GA005G is highly durable with advanced protection against heat and
dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart
and an electric brake that will rapidly stop the wheel rotation for safe user operation.
New optimum charging system built smart to achieve rapid optimum charge.
A well balanced, ergonomic design means less fatigue for the user.
This Coil Roofing Nailer has a durable aluminum housing and a one-door loading system for fast reloading. It has a dry-fire lock out to prevent dry firing and to alert the user to reload the magazine. Depend on this Coil Roofing Nailer for durability and comfort.
Step up to the tough and dependable RoofPro?445XP Coil Nailer
Lightweight and well balanced for easy maneuverability.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
QUOTES, QUESTIONS, COMPLAINTS? WE'RE ALL EARS. ENTER YOUR INFORMATION AND WE'LL GET BACK TO YOU WITH THE INFO YOU NEED.