The 40V Max. Brushless Impact Driver has been designed so that you can work smarter, not harder. With 6 optimized fastening controls each mode tailors the driver speed and impact rate to the task at hand.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless Impact Driver has been designed so that you can work smarter, not harder. With 6 optimized fastening controls each mode tailors the driver speed and impact rate to the task at hand.
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
New optimum charging system built smart to achieve rapid optimum charge.
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. Improved performance with massive drilling capacities with up to 152mm hole saw capacity and 50mm auger bit capacity. Equipped with Active Feedback Sensors the tool will automatically shutdown in the event of a kickback. With drilling speeds up to 35% faster then the equivalent 18V model. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. Improved performance with massive drilling capacities with up to 152mm hole saw capacity and 50mm auger bit capacity. Equipped with Active Feedback Sensors the tool will automatically shutdown in the event of a kickback. With drilling speeds up to 35% faster then the equivalent 18V model. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
New optimum charging system built smart to achieve rapid optimum charge.
Bosch's X-LOCK Backing Pads feature the X-LOCK mount that offers a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting the X-LOCK backing pad on an X-LOCK grinder. The wheel mounts properly with the included X-LOCK clip. The wheel is released from the grinder with the pull of a lever. The pads work with Bosch abrasive fiber discs made with high-quality Zirconia grit for exceptional metal removal and finishing. Bosch X-LOCK Backing Pads are not backward compatible with standard 7/8 In. arbor mounts.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This continuous rim diamond blade is designed for fast, clean cuts in most common ceramic and stone tile materials. These blade provides an optimized mix of select quality diamonds, to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Wire Wheels feature the X-LOCK mount and offer a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. This high-quality crimped tempered steel features maximum wire density for long life, to de-burr gears, remove oxides, scale, flash, and for edge blending. Bosch cable-knotted, stringer bead and crimped wire wheels are ideal for deburring metal, bead weld prep, cleaning welds, edge blending and more. The precision-balanced wheel and robust construction allows for professional applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's metal-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
The 40V Max. Brushless 185mm Circular Saw delivers high performance with 6,000rpm cutting speed. With best in class cutting speed the HS003G has the ability to cut up to 20% faster then the equivalent AC model. Enhanced with added safety protection the saw features an electric brake and soft start for added user safety. In addition to these safety features the HS003G is equip with Automatic Torque Drive Technology (ADT) which automatically adjusts rpm and torque according to the load conditions to optimize cutting speed. Compatible with AWS* the HS003G can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger.
* AWS Receiver sold separately
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless 185mm Circular Saw delivers high performance with 6,000rpm cutting speed. With best in class cutting speed the HS003G has the ability to cut up to 20% faster then the equivalent AC model. Enhanced with added safety protection the saw features an electric brake and soft start for added user safety. In addition to these safety features it is equipped with Automatic Torque Drive Technology (ADT) which automatically adjusts rpm and torque according to the load conditions to optimize cutting speed. Compatible with AWS* the saw can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger.
* AWS Receiver sold separately
The 40V Max. Brushless 185mm Circular Saw delivers high performance with 6,000rpm cutting speed. With best in class cutting speed the HS003G has the ability to cut up to 20% faster then the equivalent AC model. Enhanced with added safety protection the saw features an electric brake and soft start for added user safety. In addition to these safety features the HS003G is equip with Automatic Torque Drive Technology (ADT) which automatically adjusts rpm and torque according to the load conditions to optimize cutting speed. Compatible with AWS* the HS003G can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger.
* AWS Receiver sold separately
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
New optimum charging system built smart to achieve rapid optimum charge.
QUOTES, QUESTIONS, COMPLAINTS? WE'RE ALL EARS. ENTER YOUR INFORMATION AND WE'LL GET BACK TO YOU WITH THE INFO YOU NEED.