The 40V Max. Brushless Impact Driver has been designed so that you can work smarter, not harder. With 6 optimized fastening controls each mode tailors the driver speed and impact rate to the task at hand.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless Impact Driver has been designed so that you can work smarter, not harder. With 6 optimized fastening controls each mode tailors the driver speed and impact rate to the task at hand.
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
New optimum charging system built smart to achieve rapid optimum charge.
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. Improved performance with massive drilling capacities with up to 152mm hole saw capacity and 50mm auger bit capacity. Equipped with Active Feedback Sensors the tool will automatically shutdown in the event of a kickback. With drilling speeds up to 35% faster then the equivalent 18V model. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. Improved performance with massive drilling capacities with up to 152mm hole saw capacity and 50mm auger bit capacity. Equipped with Active Feedback Sensors the tool will automatically shutdown in the event of a kickback. With drilling speeds up to 35% faster then the equivalent 18V model. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
New optimum charging system built smart to achieve rapid optimum charge.
Bosch's X-LOCK Backing Pads feature the X-LOCK mount that offers a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting the X-LOCK backing pad on an X-LOCK grinder. The wheel mounts properly with the included X-LOCK clip. The wheel is released from the grinder with the pull of a lever. The pads work with Bosch abrasive fiber discs made with high-quality Zirconia grit for exceptional metal removal and finishing. Bosch X-LOCK Backing Pads are not backward compatible with standard 7/8 In. arbor mounts.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This continuous rim diamond blade is designed for fast, clean cuts in most common ceramic and stone tile materials. These blade provides an optimized mix of select quality diamonds, to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
The 40V Max. Brushless ¾” Impact Wrench delivers 1,800Nm of fastening torque and 2,050Nm nut busting torque for unmatched fastening performance. Featuring high durability construction the battery housing is protected by a battery vibration suppression system. This system protects the battery from damage due to excess vibration caused during heavy duty fastening applications. In addition to the power of the TW001G it is also highly intelligent with 6 optimized fastening controls each mode tailors the driver speed and impact rate to the task at hand, ensuring you don’t damage the fastener or material.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless 28mm Rotary Hammer delivers high performance with 2.8 joules of hard hitting impact energy.
That impact energy allows you to drill holes in masonry up to a 28mm diameter quickly and efficiently. Anti-Vibration Technology (AVT) actively reduces the tools vibration through a series of count weight mechanisms and vibration absorbing housing. These designs significantly reducing the vibration transferred to the user for more comfortable use of the tool over extended periods of time. Compatible with AWS* the HR001G can be paired with a compatible vacuum for on demand dust extraction. AWS uses Bluetooth to wirelessly power on and off the extraction unit using the tools trigger. In addition the HR001G is compatible with a wide variety of dust management options including the onboard dust extraction system DX12.
AWS Receiver sold separately
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. Improved performance with massive drilling capacities with up to 152mm hole saw capacity and 50mm auger bit capacity. Equipped with Active Feedback Sensors the tool will automatically shutdown in the event of a kickback. With drilling speeds up to 35% faster then the equivalent 18V model. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
New optimum charging system built smart to achieve rapid optimum charge.
The 7 1/4" Sliding Miter Saw features an adjustment free cut line indication for better accuracy and visibility. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Compact and lightweight construction for easy transporting and storage.
The DCF899B 20V MAX* XR® Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.
The DCF899B 20V MAX* XR® Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.
The DCF880B 20V MAX* Lithium Ion 1/2" Impact Wrench is comfortable to grip with a compact and lightweight design to reach tight spaces and increase productivity.
The DCS391B 20V MAX* 6-1/2" Circular Saw with a 6-1/2" carbide tipped blade operates on a powerful 5150 rpm motor with a 0 to 50-degree bevel capacity on a lightweight and durable magnesium shoe.
The 20V MAX* Brushless Handheld Blower provides the ability to clear debris with an air volume of up to 400 cubic feet per minute at 90 miles per hour. With an ergonomic and extremely lightweight design (7.1 lbs. with 20V MAX* 5.0Ah battery--DCB205), the blower is easy to control and minimizes stress on the arm. The variable speed trigger and speed lock give the user full power control.
QUOTES, QUESTIONS, COMPLAINTS? WE'RE ALL EARS. ENTER YOUR INFORMATION AND WE'LL GET BACK TO YOU WITH THE INFO YOU NEED.