The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. The ideal combination of power and speed with drilling speeds up to 35% faster then the equivalent 18V model. The improved performance allows for massive drilling capacities with up to 152mm hole saw and 50mm auger bit capacity. For advanced safety the DF001G is equipped with Active Feedback Sensors automatically shutting down the tool in the event of a kickback. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless Hammer Driver Drill has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque. The ideal combination of power and speed with drilling speeds up to 35% faster then the equivalent 18V model. The improved performance allows for massive drilling capacities with up to 152mm hole saw and 50mm auger bit capacity. For advanced safety the DF001G is equipped with Active Feedback Sensors automatically shutting down the tool in the event of a kickback. The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
*Kit includes one 40V (4.0 Ah) MAX Li-Ion Battery and 40V MAX Rapid Charger
The 40V Max. Brushless Impact Driver has been designed so that you can work smarter, not harder. With 6 optimized fastening controls each mode tailors the driver speed and impact rate to the task at hand.
New optimum charging system built smart to achieve rapid optimum charge.
Bosch's X-LOCK Cup Brushes feature the X-LOCK mount that offers a change out that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch Cup Brushes are ideal for removing weld scale, burrs, and corrosion. These crimped wire cup brushes are made with carbon steel bristles that provide a softer brushing action for confined spaces. The precision-balanced cup virtually eliminates vibration and they are made with high-quality materials. X-LOCK Cup Brushes are not backward compatible with standard 7/8 In. mounts.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
Bosch's masonry-grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for grinding or blending applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
The protective cover can be adjusted quickly, easily and without tools. Safety has also been considered, both grinders are equipped with Active Feedback sensing Technology (AFT). AFT is activated in case of a sudden reduction in speed or when the grinding wheel is clamped in the material and switches the machine off automatically preventing user injuries. These are extra safe machines, equipped with an electric brake which will stock the disc in an instant.
High durability features specifically designed for XGT line of tools.
High durability features specifically designed for XGT line of tools.
The 40V Max. Brushless 125mm (5”) Slide Switch Angle Grinder delivers cutting speeds up to 40% faster then the 18V
equivalent. Re-designed to withstand harsh conditions the GA005G is highly durable with advanced protection against heat and
dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart
and an electric brake that will rapidly stop the wheel rotation for safe user operation.
The 40V Max. Brushless 125mm (5”) Slide Switch Angle Grinder delivers cutting speeds up to 40% faster then the 18V
equivalent. Re-designed to withstand harsh conditions the GA005G is highly durable with advanced protection against heat and
dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart
and an electric brake that will rapidly stop the wheel rotation for safe user operation.
New optimum charging system built smart to achieve rapid optimum charge.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX10-45PE 4-1/2 In. X-LOCK angle grinder features the X-LOCK mount, offering a wheel change interface that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The grinder features a narrow grip zone. The GWX10-45PE ergonomic grinder features a narrow grip zone for extended comfort and control, combined with a powerful 10-amp motor. It delivers results, producing up to 11,000 no-load rpm for maximum productivity in grinding and cutting applications. The tool weighs 4.6 Lbs. It features a multi-grip paddle switch, which provides increased grip options for better ergonomics, comfort and control. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. For added convenience, it has an auxiliary handle and an adjustable tool-free guard.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that delivers straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Wire Wheels feature the X-LOCK mount and offer a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. This high-quality crimped tempered steel features maximum wire density for long life, to de-burr gears, remove oxides, scale, flash, and for edge blending. Bosch cable-knotted, stringer bead and crimped wire wheels are ideal for deburring metal, bead weld prep, cleaning welds, edge blending and more. The precision-balanced wheel and robust construction allows for professional applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
Bosch's X-LOCK Backing Pads feature the X-LOCK mount that offers a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting the X-LOCK backing pad on an X-LOCK grinder. The wheel mounts properly with the included X-LOCK clip. The wheel is released from the grinder with the pull of a lever. The pads work with Bosch abrasive fiber discs made with high-quality Zirconia grit for exceptional metal removal and finishing. Bosch X-LOCK Backing Pads are not backward compatible with standard 7/8 In. arbor mounts.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This continuous rim diamond blade is designed for fast, clean cuts in most common ceramic and stone tile materials. These blade provides an optimized mix of select quality diamonds, to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's X-LOCK Diamond Blades feature the X-LOCK mount and offer a blade change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The blade is released from the grinder with the pull of a lever. This segmented rim diamond blade is designed for fast universal rough cuts in concrete, brick, and masonry. The blade provides an optimized mix of select quality diamonds,to deliver both fast cutting and longer life. Each blade features a steel core that produces straight smooth cuts with less wobble. This stability helps result in longer blade life.
Bosch's masonry-cutting and grinding abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Silicon Carbide grit for exceptional speed and durability in tough environments for cutting, grinding or blending applications.
Bosch's metal-cutting abrasive wheels feature the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK Wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. Bosch bonded abrasive wheels are made with high-quality Aluminum Oxide grit for exceptional speed and durability in tough environments for cutting applications.
The Bosch GWX13-50VSP 5 In. X-LOCK Angle Grinder Variable Speed with Paddle Switch features the X-LOCK mount, offering a wheel change that's up to five times faster than conventional interfaces. There’s an audible snap when mounting an X-LOCK wheel on an X-LOCK grinder. The wheel mounts properly without the need for a spanner wrench or flange nuts. The wheel is released from the grinder with the pull of a lever. The angle grinder delivers maximum power – 13 amps and 11,500 rpm. It has a variable-speed setting – 2,800 to 11,500 RPM – allowing the user to match speed to application. Equipped with epoxy-coated field windings and direct-motor cooling, this grinder is built for a longer tool life. It features spiral bevel gears for smooth transmission of power. It has a Vibration Control auxiliary handle for additional user comfort and an adjustable tool-free guard.
QUOTES, QUESTIONS, COMPLAINTS? WE'RE ALL EARS. ENTER YOUR INFORMATION AND WE'LL GET BACK TO YOU WITH THE INFO YOU NEED.